These caps are available for the various profile ends and are constructed from a synthetic die-cast material. The cover caps reduce the risk of unprotected profile ends being damaged.

These strips are for protecting the profile slots and can be used for housing electrical cables along the length of the profile.

They are also used to close profile slots to prevent dirt accumulation inside the Profile structure.

Connecting elements can be used to construct frames, protective barriers, fixtures, trolleys, workstations, conveyors, machines, machine enclosures or an entire production facility from extruded aluminium profiles.

All these connecting elements are bolted or screwed into place. Connections can be made along the full length of the profile slot. These connections provide sufficient stability, even under heavy loads.

These connecting elements can be re-used over and over again, or can be applied in other applications. This connection technology makes working with aluminium profiles an extremely viable economic prospect.

Compact frame profiles are an economic solution for the construction of protection guarding, with open grills, solid plates or clear glass. The protection material is held in the profile slot, securely sealed with a special mounting rim.

Typical modular panels are 2040mm high and 1100mm wide using structural profile of 45 x 45L and 45 x 90L. All electrical wiring can be housed within the frames and accessed by removing a profile cover.

Window panels are supplied in clear Perspex or polycarbonate. Opaque panels are available in rigid expanded plastic with a ‘wipe clean’ surface. Available in various colours blue, grey, white, green, yellow, red and black.

Feet can be supplied in either steel or synthetic material. The feet are used for accurate leveling of the construction.
The foot can be screwed into the centre of the profile.

Alternatively a base plate can be bolted to the bottom of the profile, with the foot screwed into the base plate. A threaded sleeve is available to retain the foot at 90° to the profile.

The foundation brackets are used to secure the construction to the floor to ensure maximum stability. These brackets are fabricated from mild steel.